The details.

Natural timber inlay in a metal band — each section of wood is unique, so no two rings look identical. The combination of steel and wood gives this ring warmth that plain metal can't match. The timber is sealed for protection but prolonged soaking should be avoided. Built for blokes who appreciate natural materials — hunters, farmers, woodworkers, outdoors types. Tough base construction with a bit of Kiwi earthiness in the finish.

Caring for the whiskey barrel inlay

Treat the sealed oak like good leather — off during showers, swims and hot dishwater. Quick splashes are fine. A drop of mineral oil yearly keeps the grain from drying out.

Sizing a wood-inlay damascus band

Damascus steel sits heavier than titanium, so order true to finger — comfort-fit handles the bulk. NZ buyers can request a free sizer if between numbers.

Choosing this over plain titanium

Titanium is set-and-forget; the timber here needs a touch more care. But no titanium band has grain that's literally one-of-one. Pick this for character, titanium for low-maintenance. See titanium rings.

Q: What if the wood inlay cracks?

A: Sealed oak is stable — prolonged soaking is the killer. Keep it off in long baths and pools. Email us if anything fails inside warranty.

Q: Is each ring's grain really unique?

A: Yes — every section of whiskey barrel oak is cut from a different stave. Yours won't match the photo exactly, and that's the point.

Q: Will the black damascus pattern fade?

A: The dark layer is acid-etched into the steel itself, not coated. It deepens with wear rather than wears off.

Be the first to review.

Caring for your Wood Inlay ring

Wooden inlays on men's rings (koa, walnut, whisky-barrel oak and similar) are stabilised with resin or oil to seal the grain, but they're still organic and need gentler care than full-metal bands. Wipe with a slightly damp cloth — never soak the ring — and dry it immediately. Once or twice a year rub a drop of mineral oil or beeswax into the inlay with a soft cloth to keep the wood from drying out, especially through NZ winters where indoor heating drops humidity.

Take the ring off in the shower, pool, spa and surf — prolonged water exposure can eventually lift the inlay from its metal channel. Same goes for the dishwasher and washing-machine front. With sensible care a quality wood-inlay ring lasts decades; the metal outer sleeve (usually titanium, tungsten or ceramic) protects the wood from edge knocks and impact.

Common questions about Wood Inlay rings

Will the wood inlay crack or fall out?

Quality wooden inlays are pressure-set and resin-stabilised, so they stay put through normal wear. The two things that cause failures are prolonged water exposure (showering and swimming with it on) and extreme dryness, which can shrink the wood. Avoid both and the inlay lasts as long as the metal sleeve.

Can I shower or swim with a wood-inlay ring?

Quick splashes are fine, but daily showers and any swimming will eventually swell the wood and lift the inlay. Take the ring off and place it on a dry shelf — most NZ buyers keep a small dish on the bathroom bench for exactly this.

How do I keep the wood looking fresh?

Twice a year, rub a tiny amount of mineral oil or beeswax into the inlay with a soft cloth and buff off the excess. This replaces natural oils lost to skin contact and dry indoor air, and brings back the colour depth without any sticky residue.

Are wood-inlay rings suitable for tradies?

They suit lighter trades and office wear better than heavy site work. Sand, sawdust, solvents and constant glove abrasion will wear the inlay faster than a plain metal band. For full-time tradie wear, look at full titanium or tungsten — wood-inlay rings are better for evenings and weekends.

Considering alternatives?

Most wood-inlay rings use a metal sleeve, and the most common pairing is titanium rings as the outer band — lightweight, hypoallergenic and easy to engrave. If you love the natural-materials look but want zero maintenance, a plain titanium band gives a similar warmth-on-finger feel without the inlay care.